How To Solder Multiple Wires Together

A stand with alligator clips can be homemade or purchased to hold the wires in place while applying heat from the iron.

How to solder multiple wires together. 2 Heat the joint with a soldering iron or pencil from underneath. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. 3 Heat the shrink tube to make it shrink down around the wire.

Let it cool without being disturbed. Ad Quality Solder Wire Drawing Machine. Make sure the wrap is tight.

Ad Quality Solder Wire Drawing Machine. The process will form a good solid joint. When done properly you have a strong conductive connection that turns two separate wires into one.

Meets The EU RoHS Directive 201165EU Claim. The ends are twisted together to form a good mechanical bond between the wires. Another approach that sometimes works is to first use a few turns of much finer wire to hold the two main wires together the whole blob then being soldered.

4 Use more shrink tube to bundle multiple connections. You interweave the threads of the wires together before soldering the joint solid. Its not too difficult.

You can also apply some solder. The first two splices require that about a half-inch of the insulation be removed from both of the wire ends. You should not be able to pull the bundle apart once the solder has cooled.