How To Remove Soldering Iron Tip

Once your iron is heated up for a job wipe it on a wet sponge to remove old solder and apply solder to the tip.

How to remove soldering iron tip. Wipe the iron on a damp sponge to remove the excess. Now remove the tip and clean it with a moist sponge to remove the cleaner. How to Tin or Re-Tin Soldering Iron Tip.

You also can clean your soldering iron tip with a sponge while using it to keep it clean. Dip the tip into the tinner making sure that the entire oxidized surface is in contact with the re-tinning product. To use the Tip tinnercleaner heat the soldering iron.

Each time you clean the soldering iron and put it away apply a fresh solder to the tip. Melt some good quality of solder wire on the Tip. Once clean and shiny perform tinning and now your tool is ready to use.

If the tip is hot enough normally at least 300C and relatively free of rust the solder will flow up the tip and coat it. Wipe OFF the solder on the Cleaning Sponge or Copper Wool. After trying both the sponge and flux to clean the tip of your soldering iron sal ammoniac would be the next step if the others didnt work.

This will prevent buildup from clogging your solder iron over time and diminishing its efficiency. Then remove the tip and tap the barrel to dislodge any debris. If all else fails Soldering Iron tips do not last forever.

Wipe the iron on a damp sponge to remove the excess. This step will coat the iron in a mixture of flux and solder. Keep the tip clean Keeping a tip clean is also a solid strategy to reduce oxidation.