How To Prepare Soldering Iron Tip

If the solder tip does become oxidized apply flux-core solder to the oxidized tip.

How to prepare soldering iron tip. Apply a little solder to the irons tip and place the iron on top of the wire and lightly press down towards the rail. The gas soldering irons is an excellent alternative to electric soldering irons it is indispensable in places where there is no power supply. Ad Compare a Huge Selection of Parts.

To use the Tip tinnercleaner heat the soldering iron. Once every item has been tinned place the wire end which has been bent to a small L shape up to the solder on the rail. The soldering lead and the iron tip should be at an angle of 45 degrees so as the make the solder flow easily.

When you unbox a brand new soldering iron the first thing you need to do is tin the iron plating on the tip to help protect it from oxidation. This step will coat the iron in a mixture of flux and solder. To prevent this you use solder to protect it.

The hot solder on the irons tip will cause both the wires solder and the rails solder to melt into one. Heat from the solder tip will activate the flux and start the chemical reaction that removes oxides. Apply very little flux in the solder joints and make the soldering.

In order to prep a new soldering iron you should first be aware of how to use it. Clear a work area then grab your soldering iron a solder sponge and water. Brass wool in a little pot.

Operate at the lowest possible temperature 800F 427C or lower. Filing off the black really isnt the best thing to do--It leaves microscopic holes and fissures in the tip which A Reduces the effective surface area and B promotes burning inside the fissures where the tin doesnt go. So when its heating up you must apply solder 60 tin 40 lead to the tip and this process is called tinning the tip.