How To Clean A Soldering Iron With Flux

If youre using solder with a flux core start cleaning your soldering iron by following the tinning steps above.

How to clean a soldering iron with flux. Apply a small amount of solder to prevent further oxidation. Step 2- Using a brush apply flux with solder to both pieces of the terminal that need to be connected. Move the sponge all around the tip and clean.

This cleaner is composed of corrosive flux and solder which is in powder form. Once your iron is heated up for a job wipe it on a wet sponge to remove old solder and apply solder to the tip. If the tip is hot enough normally at least 300C and.

Take a clean brush. Clean flux residues from the soldering area with a quality flux remover. To prevent damage to the board you should re-solder your soldering iron now and then as the technique will remove solder from it as well.

Cleaning the flux residue. Tinning using flux and cleaning. Wipe the iron on a damp sponge to remove the excess.

This should lead to a clean shiny tip ready for use for more info see this video. If all else fails Soldering Iron tips do not last forever. The sponge should not be dry as it will get charred.

Flux isnt for cleaning the iron though. Modern cleaning methods involve the use of soft metal shavings pot. Start your soldering iron and clean it while working with electronics.