Using A Starter Pin On A Router Table

It rubs against a template attached to the work occasionally the pin rubs against the work itself controlling where the bit cuts.

Using a starter pin on a router table. Push the workpiece against the pin and use the pin as a fulcrum. The pin must fit snugly in the hole and project above your workpiece. Stock is most vulnerable to catching and being thrown at the beginning of the cut before it engages the router bits guide bearing.

Have you ever bought a router table insert or router lift and wondered what the threaded pin is for that comes with the unit. Rick recommends the use of a safety guide pin or starter pin when you rout freehand. Many woodworkers make this their top choice for the best router tables.

Love the table though it works great for a weekend novice. As such the inset router plate is going to be machined unique to the table opening. Often seen recommendation to use starter pin when pattern routing on a router table but never any instructions on how to use.

Thread the starter pin into the threaded hole in the mounting plate and tighten securely with a slotted screwdriver Fig. But when you dont a router fence the bit attached into the router plate is a trick for the nicer cuts. Bosch Cabinet Style Router Table RA1171.

Router Table Fulcrum Pin Location. The starter pin 26 is used instead of the fence for operations that involve routing curves in the workpiece. All things you require for the good result are a good bit and a proper template.

Its a 14-28 thread. If you need a. Use a 1 4 rod or dowel made of steel brass or a dense hardwood and drill a hole of the same size into your table located about 2 from the bit as shown at above.