Proper Way To Solder Wires

Results in perfect solders and joints 99 of the time.

Proper way to solder wires. Ad tvcmall Smartphone Accessories of Various Brands to Global Customers at Affordable Prices. But even in the soldering community theres still room to argue. Keep the iron in place and touch the solder to the wire until its fully coated.

Tin the soldering gun ie melt a little solder on it. Twist the wires together. Make sure to heat it before because of that the Solder melts and joints with the connector.

The heat shrink should be cut so that it is about a 12 longer than the area to be soldered. Ad Quality Solder Wire Drawing Machine. This procedure avoids a cold solder joint that could cause trouble in the future.

Use rosin core solder. Melting on the side opposite the heat guarantees that the solder will really adhere to the copper rather than just coat the outside. When the solder melts into the terminal and wire the joint is properly soldered.

Clean the ends of the stripped wire with some sandpaper or steel wool. The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires. This solder melts at about 370 F.

Or else just place the soldered tip of wire on a presoldered solder pad on a pcb apply heat. I will show you how to solder wires together the right way to seal the solder joint with heat shrink is a must and you also need to make sure you do not have a cold solder joint. Some say its better to joint the two wires using a Y-splice while some only swear by the good ol rat tail splice.