How To Take Out Broken Headphone Jack From Ipad

Screw the sheet metal screw into the hole about 6 turns.

How to take out broken headphone jack from ipad. Now place the burr back into the jack socket and gently feel around until the burr is located in the notch you cut. Professionals and DIYers alike trust iFixit tools to get the job done. Eventually I got cotton out of a q-tip and I misread an instruction.

The tip of a headphone plug broke off in the iPads jack. Now insert the melted tip of the ink tube into the headphone jack and press firmly. Okay so this page saved my IPad.

I dropped my iPad in water and some water went in my headphone jack. As quickly as you can shove the tip of the straw into the headphone port tightly so that it can form around the broken tip of the headphone jack. To clean a headphone jack start by removing the cotton from the end of a cotton swab until its the width of the swabs middle portion.

GripStick is a tool designed to easily remove broken 35mm headphone plugs from jacks. I found them contained in an online article. The tip should melt the plastic at the center of the jack then twist it a bit so the hook can melt its way into the plastic and take hold let the plastic harden again then try to gently pull it out.

Widen the tube with a nail or the tip of the knife. Grab the screw with pliers and pull. Apply a little side pressure and carefully pull the burr out and the broken jack part should pop right out.

Twist it in by hand until it grips the wires inside the plug. Pull out the drill bit. This should get the broken jack out with it.