How To Solder Very Small Wires
Leave a correctly sized solder gap between insulation and solder joint.
How to solder very small wires. Sold in the electronics department. Ad Find Every Electronic Parts on Octopart. Then place the wire on top of the cool solder and use the soldering iron to melt it all together.
The solder should be fed into the cool side away from the heat which allows it to be drawn in smoothly by the heat transfer through the wires. Compare Pricing Distributors Save. If you have a tiny ball of solder on the tip you can get the ball to stay behind at the joint as DZE indicates.
There are small lies big lies and then there is what is on the screen of your oscilloscope. How to Solder Two Small Wires - YouTube. Repeat this process on.
If you do it right you get a big melted bead ON the iron but with the wires running through the middle of it. You have to use leaded solder though because this will pull the enamel wire right onto the center of the pin or pad. It took 6 hours to get everything prepared put into position solder and then test it.
Keep the iron in place and touch the solder to the wire until its fully coated. Probably 50 or so tiny wires in that mess. Solder with shrink wrap.
In this video Im going to show you how I solder small wires on a PCB. Make seven or eight turns and cut the excess of the wire. Pre tin the pads as well.