How To Solder Two Wires Together

Use tweezers pliers etc.

How to solder two wires together. Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. The most secure and durable way to splice two wires together is to solder them. When soldering wires with a big diameter it is not easy to bend or twist them.

When you are tinning the wires the resin will help the solder flow smoothly. When done properly you have a strong conductive connection that turns two separate wires into one. The solder should flow freely onto the wire and coat it if its stranded wire the solder should flow into it and fill the wire.

How to Solder Wires Together Best tips and tricks - YouTube. Youll also need some PVC shrink tube. To gather stray strands into the intermingled bundle.

The simple welding technique binds metals together to form electrically conductive joints in a way where you can easily detach them later if necessary. The solder will flow to where the heat is wick or sweat soldering copper pipe is called sweating joints. Your solder will be applied opposite from the iron on top of the wire.

There are three common techniques to solder wires together. Another technique of soldering two wires together is the lap splice. Place soldering iron under the wire.

Soldered joints are mechanically weak. To get started use wire strippers on the wire so you have bare wire exposed. Strip both wires back by 810 mm.