How To Solder Three Wires Together
A pig-tail where the wires are bent at a 90-degree angle to the rest of the wire is NOT a suitable connection and will cause problems dont do it.
How to solder three wires together. You should not be able to pull the bundle apart once the solder has cooled. There are three main ways to solder wires together. How to Solder Wires Together Best tips and tricks - YouTube.
Why is solder used for joining electrical wires. Touch the tip of the soldering iron to the copper wires. Make sure your soldering iron is completely hot before touching the tip to one of the wires.
Hold it for 3-4 seconds on the wire. This is essentially putting the solder on the wires before attaching the connector. Hold it on the wire for 3-4 seconds.
Work from multiple angles and make sure to get thorough coverage. Heat up the joint and melt the solder with the wire not the soldering iron. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them.
Wire splicing is not like rope splicing in days of old where two ropes were actually braided together into one. Place the tip of the iron on the wire and let it heat for a few seconds. To a post on a Deans connector.
Make seven or eight turns and cut the excess of the wire. The challenge is holding the wires in place long enough for the solder to cure. The wires will melt and will get soldered together.