How To Restore A Soldering Iron Tip

ANd of course if you dont tin the tip in the first place again letting.

How to restore a soldering iron tip. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. Good soldering process is important. If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the.

However there are other things you need to consider to ensure the longevity of soldering iron. Below is the proper process on how to restore your soldering iron tip or desoldering nozzle. Dip the tip into the tinner making sure that the entire oxidized surface is in contact with the re-tinning product.

This should leave the tip of the iron with a layer of solder on it. In some expensive soldering iron there is a thermal shutdown feature also available. Unroll a portion of solder then roll the hot tip of the iron from the end of the solder until it does one complete turn on the solder.

Wipe the tip clean and re-tin it between every joint. If it doesnt you need to remove all solder and grind the. Set the solderingdesoldering station to a temperature of 300C approximately 575F Add a flux cored wire solder that will be used in your applications or use the HAKKO FS-100 Tip Polish.

Buy a High-Quality Product. Install the prepared tip in your soldering iron. If the tip gets really bad it can often be restored with a chemical tip tinner.

Wipe a wet sponge across the solder irons tip after each stroke to avoid buildup on the tip. To maintain the performance of any soldering iron tip a simple maintenance procedure is recommended. Soldering tips are made of copper base material and coated with iron to prevent erosion.