How To Prime A Soldering Iron Tip

A solder pot may also be used to tin or re-tin your soldering iron tip.

How to prime a soldering iron tip. Clean the tinned tip and you have a refurbished soldering tip. Search Findchips and Save Today. Apply liquid flux to the working area of the tip and submerse it into the molten solder in a smooth even motion.

There are screw type tips tips that screw onto or into the solder iron element slip on tips that slip over the element and plug type tips that slide inside of the element. If the tip is a little too dirty you can apply a cleaning paste and a tip tinner. Turn the solder pot on and allow it to achieve the desired temperature.

A simple dab on the tip should do the job. Do not wait for it to get hot before touching the solder to the tip. Plug in the iron and switch it on.

Your goal is to remove old solder from the tip. It is a much stronger flux that will clean and tin the tip. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron.

Brass wool in a little pot. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. This step will coat the iron in a mixture of flux and solder.

Fit the new tip into the retaining sleeve and screw it back to the heating element. After a minute or two the iron should be hot enough to steam when touched to the sponge. This should leave the tip of the iron with a layer of solder on it.