How To Make A Soldering Iron Stand At Home

Wipe the tip of the soldering iron on a damp wet sponge to clean it.

How to make a soldering iron stand at home. Accommodates the standard cleaning sponge. Make a second 60 degree bend in it directly above the center of the circle so that it forms a V that the soldering iron can sit in. First make sure that the soldering iron is heated up to the desired temperature setting.

This method is for soldering chips. The WELLER SP25NKUS is a solder iron kit that features the SP25NUS iron. Once the tip is clean touch the object you want to solder with the hot tip.

Its very easy for them to get far too hot and damage the stuff youre soldering. It Can Accommodate Hakkos 599B Tip Cleaner Too. Wipe the tip of the soldering iron on a damp wet sponge to clean it.

This Product is used With Hakkos FX-650 FX-600 PRESTO MACH and DASH Soldering Irons. If you want them to remain firmly connected youll have to make use of a normal tape to cover them together. It is heated up to temperatures beyond its melting point at around 600 degrees fahrenheit which then causes it to melt which then cools creating the soldered joint.

As you do this make sure to touch the graphite using a free wire connected to the ground. Using tweezers place the component in its correct position and hold it there. Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip.

- since it is now locked onto the broomhandle get your metal-blade hacksaw and cut the wire exactly where it enters the hole. Begin taking a piece of the solder and placing it on the corner of your box frame applying heat from the soldering iron to fasten the corner. As usual start by applying flux to the pads on the circuit board.