How To Clean Tip Soldering Iron

Apart from removing the flux off it is essential to clean off surplus solder.

How to clean tip soldering iron. Cleaning the tip after every soldering session. Small contamination and oxidation on the iron tip can be cleaned by wiping a hot iron tip on the moist soldering sponge. Wire wool has the advantage of not cooling down the soldering iron too much and you dont have to wait for the iron to get its desired temperature.

Wipe the tip clean and re-tin it between every joint. This should lead to a clean shiny tip ready for use for more info see this video. A quick wipe is good enough to remove oxidation.

Put a good amount of solder on the tip when storing it or leaving it idle for any length of time. The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use. Use a damp sponge to clean the tip and wipe it off quickly to avoid cooling the tip excessively.

Ad Your Official Site for RC Vehicles. This step will coat the iron in a mixture of flux and solder. This should lead to a clean shiny tip ready for use.

Melt some good quality of solder wire on the Tip. Heat your soldering iron up to the low end of a typical work range generally between 280 and 320C. Maintaining the right operating temperature ie 320 C.

Once clean and shiny perform tinning and now your tool is ready to use. Now remove the tip and clean it with a moist sponge to remove the cleaner. When pre-cleaning is necessary for plated tips they should be cleaned with a mildly abrasive emery cloth and may require an acid flux to remove the oxides before tinning or re-tinning.