How To Clean Soldering Iron Tips

Now remove the tip and clean it with a moist sponge to remove the cleaner.

How to clean soldering iron tips. Tinning in between sessions and after soldering. The best tip tinner is your solder--tips should always be coated with a small amount of solder. To clean my iron I add some solder and shake it off.

If all else fails Soldering Iron tips do not last forever. You can also use stainless steel pot scrubber as long as it is dry to prevent transmitting the heat. To apply the tip cleaner first heat the soldering iron.

Once clean and shiny perform tinning and now your tool is ready to use. Wipe OFF the solder on the Cleaning Sponge or Copper Wool. Use a protective layer of solder The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder.

This should lead to a clean shiny tip ready for use. A solder pot may also be used to tin or re-tin your soldering iron tip. Avoid using low-residue flux or dirty flux.

Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. How to Clean Maintain Your Soldering Iron Tip For use with Solder Pro 100 110 120 150. Once the re-tinning product melts around the tip hold it for several seconds and then clean the tip using dry cleaning methods like brass wool or an automatic tip cleaner.

This step will coat the iron in a mixture of flux and solder. Then dip into the tin of tinner cleaner with a slight twisting action. There are several ways to reduce oxidation buildup on solder tips.