How To Clean Solder Gun Tip

But for the harder to remove stuff I keep a brass wool pad handy.

How to clean solder gun tip. Then dip into the tin of tinner cleaner with a slight twisting action. Or you may find luck with a flameless heat gun. Once the tip is clean let it return to the operating temperature.

This step will coat the iron in a mixture of flux and solder. Answer 1 of 2. As the vacuum runs put the device closer to the joint that you want to disconnect.

If it doesnt you need to remove all solder and grind the tip again more thoroughly. Clean the tinned tip. Another option is to use tip cleaner.

This comes in a little pot that you push the tip into. Repeat the steps from 1 to 4 o remove any solder that has left. Tin the tip with a small amount of solder wiping the excess off with the scrubber.

With the iron tip cold use a polishing bar. Dont carry the solder to the joint on the iron. Just heat this tool just like how you do in a standard soldering iron.

You should clean your tip after each use. Knack for effective removal of solder using the desoldering wire. For best results keep applying the heat until the tip of the screwdriver turns red.