How To Clean Oxidized Solder Tip

Prepare a natural sponge by soaking it in water then squeezing it as dry as you can.

How to clean oxidized solder tip. Wire wool has the advantage of not cooling down the soldering iron. Use a protective layer of solder The easiest way to prevent oxidation of a solder tip is to protect it with a layer of solder. Do not use the chemical paste for purposes other than restoring of the soldering tip.

Repeat steps 2 and 3 until the oxidation has been completely removed and the tip shows a good wetting on all its working. Kindly note that oxidation can still occur in future even after re-tinning the tips. Clean the Tip.

Theyre called soler tip activator retinner refresher. You can also use stainless steel pot scrubber as long as it is dry to prevent transmitting the heat. Provides quick and safe re-tinning and cleaning of oxidized tips.

Clean the tip. Use a damp sponge to clean the tip and wipe it off quickly to avoid cooling the tip excessively. Non-Abrasive Cleaning Its important to note that the vast majority of long-life solder tips are going to have a protective coating on their surface which is specifically designed to help protect against oxidization.

If the iron tip is heavily oxidized then you should clean it with a different technique. When doing splices clean the wires by scrapingbrushingsanding solder tin the wires to be joined slide clear heat shrink tubing over one wire lay the tinned ends together and touch them with the soldering iron and they will fuse nicely then slide the clear heat shrink tubing over the joint heat shrink one end pack it with petroleum jelly then heat shrink the other end. I had the very bad habit of cleaning the tip when done with a solder joint.

These tips will make sure your soldering tip does not become oxidized and need to be re-tinned. But if any of these things are neglected in the soldering process you may need to re-tinner your tip. Take either a wet sponge or wire wool.