How To Clean A Soldering Iron Bit

Once the tip is clean let it return to the operating temperature.

How to clean a soldering iron bit. Plug in the soldering iron turn it on and let it warm up for 23 minutes. First you will want to heat the iron up to operating temperature and wipe the tip on a damp soldering sponge to gently clean it. Make the end red hot and use an old screwdriver.

After securing and preheating the PCB and void in a vice or PCB holder you suck the solder off the board by squeezing and releasing the bulb from behind the hole. Dont for instance wipe it off put it in the holder then leave it on over lunch. Switch off iron and allow to cool Slide bit retaining spring forward until it is clear of the slot in the bit.

Practice good tip care. How to clean and re tin your soldering iron Soldering tip cleaning how to clean solder tip easy - YouTube. How to clean and re tin your soldering iron Soldering tip cleaning how to clean.

Therefore you will experience ash and wood material gathering on the tip very frequently. As you do this its best to let there be a little solder to ensure the bit is tinned properly. The dampness has nothing to do with the cleaning process - thats just the mechanical wiping.

A dry cleaner can also be used. Clean the tip of the soldering iron and tin it with solder. The water just protects the sponge from the heat - by cooling the tip as the evaporation of water uses a lot of energy.

If the tip is very dirty you may want to dip the tip in a commercial tip cleaning paste and then wipe it clean on the damp soldering sponge. This can be achieved with the help of a flat-blade screwdriver Remove bit from iron never grip or bend the iron shaft this will damage the element Fit. To use the Tip tinnercleaner heat the soldering iron.