How To Clean A Dirty Soldering Iron Tip

You also can clean your soldering iron tip with a sponge while using it to keep it clean.

How to clean a dirty soldering iron tip. Cleaning Your Soldering Iron. This should lead to a clean shiny tip ready for use for more info see this video. If you do not regularly clean your solder iron you may have more stubborn stains or discoloration.

There are many cleaning solutions and the cheapest and some say best is a damp sponge. Electronix Express points out that in order to remove the dirt and debris that accumulates on the tip of a soldering iron it is necessary to wipe it clean with a sponge. To clean dirty surfaces and stains from the iron tip we highly recommend using a steel wool ball.

To use the Tip tinnercleaner heat the soldering iron. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. This works well if your tip hasnt been.

If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the. Alternatively you can use a special polishing bar particularly of the tip is corroded or extremely dirty. Leave it there until the paste melts around the tip.

In this case you have to damp down the steel wool and rub the metal tip of the soldering iron and as a result it will remove the rust and stains. Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. Then dip into the tin of tinner cleaner with a slight twisting action.

Use only distilled or deionized water for cleaning sponges Use commercial tip tinners Use regular tap water on the cleaning sponge Use dirty or contaminated sponges Drop or hit the tip against hard. Cardboard works in a pinch. This step will coat the iron in a mixture of flux and solder.