How Do You Solder Small Wires

You can fix it using a soldering iron as long as you follow the basic rules of soldering copper wire and make sure you.

How do you solder small wires. If you have a tiny ball of solder on the tip you can get the ball to stay behind at the joint as DZE indicates. If you screw up let it cool before you start over so you dont melt too much. Choosing the correct solder used to be simple however today you can obtain a wide variety of solders for different tasks.

You have to use leaded solder though because this will pull the enamel wire right onto the center of the pin or pad. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. Use a pencilsoldering iron like the one in the same picture.

And allow the solder to melt. Place the tip of the soldering iron against the solder pad. Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire.

How to Solder Wires. Perhaps you have a small electronic device such as a toy with one broken wire. Touch the tip of the soldering iron to the copper wires.

Now heat both the conductor you are trying to solder and the pad you are trying to solder to. Tiny wires sometimes only require a quick swipe across the joint to flow the tinned wires together. Remove both the solder and the soldering iron tip from the connection as soon as enough solder melts onto the pad.

Set the iron to the solders temperature range. Choosing the Right Solder Wire. Begin by removing the insulation from the ends of both wires you are soldering together.