How Do You Solder Electrical Wires

Keep the iron in place and touch the solder to the wire until its fully coated.

How do you solder electrical wires. If desired you can clamp the wire in a third hand tool or similar heat-resistant holding device. At some point over the next 2-10 seconds depending on how hot your iron is the wires will be hot enough to melt the solder. Extend the solder from its spool in a straight line.

Apply Solder to the Wire. Now heat both the conductor you are trying to solder and the pad you are trying to solder to. The connection should not have any uneven globs of solder and the solder should penetrate both wires.

Repeat this process on the other wire. When you are tinning the wires the resin will help the solder flow smoothly. Once cool inspect the union to ensure proper penetration of the solder.

Use rosin core solder. I will be using a power probe butane soldering gun. First you will have to strip off the insulator that covers the wires.

When doing splices clean the wires by scrapingbrushingsanding solder tin the wires to be joined slide clear heat shrink tubing over one wire lay the tinned ends together and touch them with the soldering iron and they will fuse nicely then slide the clear heat shrink tubing over the joint heat shrink one end pack it with petroleum jelly then heat shrink the other end. Step 2 - Choose the Right Size Wire Connector. The wires will begin to heat up.

Once a solid connection is made seal the connection with shrink wrap or electrical tape to prevent corrosion. How do you solder electrical wire to metal. For large gauge wires 14awg for an antenna perhaps make a Western Union splice then solder it.