Can I Use A Nail As A Soldering Iron Tip

Apply lots of solder to one side of the resistor then quickly melt the other side and flick it off.

Can i use a nail as a soldering iron tip. A cone tip and a bevel tip. Larger and wider tips are effective for bigger jobs. Then wipe off the excess tip tinner from the soldering tip and re-tin using wire solder.

If you see any solder splashes after just flick it off with you finger nail not the soldering iron. To get a good bond on two pieces of flat metal apply a thin layer of solder to both edges Fig. Doing this first will take care of any mild buildup and help you discern in a safe way whether the tip is still too warm to touch with bare hands.

Ad Improve Your Business ROI - Get A Better Deal On Pencil Solder Iron. I use a bevel tip. Use acid-core solder only on galvanized iron and other hard-to-solder metals.

That should remove the oxides unless you have allowed the oxidation to build up excessively. Ad Wholesale Mobile Accessories Parts Electronics With 12 years Experienced Supplier. Wipe the iron off with a damp cellulose and sulfur-free sponge.

You need steady hands so dont drink too much coffee before soldering This is a good tip but what I really want to talk about here is the real tip for your soldering iron. I looked around the garage to see what I can make the tip out of and settled on a thick masonry nail. Dont use a good soldering iron tip for things like melting plastic- it will ruin the tip and may result in toxic fumes.

Those nails are tough if they can punch 3 into concrete. I have no butane and no ride to the hardware store i have a quartz nail and a glass dome do you think if i take a soldering iron and put it into my nail and dome and just take my dab on the already heated iron. Take a wet sponge and rub it over the top of the solder iron.